|
西門子QRA51M系列火焰探測器-電眼 |
QRA51M系列火焰探測器-電眼
品牌:SIEMENS(西門子)
產地:德國 |
產品介紹 |
The flame detectors are used for the supervision of gas flames, yellow- or blue-burning oil flames and for ignition spark proving. High sensitivity.
-
With this type of flame supervision, the UV radiation emitted by gas or oil flames is used to generate the flame signal.
-
The radiation detector consists of a UV-sensitive cell with 2 electrodes, which ignite when illuminated with radiation in the 190...270 nm range of the spectrum, thereby triggering a current in the flame detector circuit.
-
The UV cell does not respond to glowing firebrick in the combustion chamber, daylight or light from the boiler room illumination.
The dust- and splashwater-proof housing of this flame detector has a fanged-on robust light metal tube with a radiation entry window for lateral viewing. A cylindrical slotted shutter rotates in the tube which interrupts the incidence of UV radiation to the UV cell mounted directly behind the radiation entry window at the rate of about 3 times per second (continuous testing of the cell’s striking and quenching performance).
The outer tube can be rotated through 180° by loosening 2 locking screws. A special clamping flange is supplied with the flame detector to ensure its vibration- and turning-proof fixing to the burner. | |
技術參數 |
主要參數 |
UV單元平均壽命 |
10000小時(在50ºC) |
爐膛背壓 |
500mbar最大 |
保護等級 |
IP40 |
重量 |
750g | | |
環境條件 |
運輸環境 |
IEC 60 721-3-2 |
內部條件 |
class 2K2 |
機械條件 |
class 2M2 |
溫度范圍 |
-55...+50ºC |
濕度 |
<95% |
運行環境 |
IEC 60 721-3-3 |
內部條件 |
class 3K5 |
機械條件 |
class 3M2 |
溫度范圍 |
-20...+50ºC |
濕度 |
<95% |
不得進水 | | | |
|